This kit can only be used for scientific research, not for medical diagnosis
Human arginine vasopressin (AVP) ELISA test kit
The kit uses double antibody one-step sandwich enzyme-linked immunosorbent assay (ELISA). To the coated microwells pre-coated with human arginine vasopressin (AVP) -obtained antibody, add specimens, standards, and HRP-labeled detection antibodies in sequence, incubate and wash thoroughly. The color is developed with the substrate TMB, which is converted into blue under the catalysis of peroxidase and into the final yellow under the action of acid. The color depth is positively correlated with human arginine vasopressin (AVP) in the sample. Measure the absorbance (OD value) at 450nm with a microplate reader to calculate the sample concentration.
Sample collection, processing and storage methods
1. Serum: Use a test tube that does not contain pyrogens and endotoxins. Avoid any cell stimulation during the operation. After collecting blood, centrifuge at 3000 rpm for 10 minutes to quickly and carefully separate serum and red blood cells.
2. Plasma: EDTA, citrate or heparin anticoagulation. Take the supernatant by centrifugation at 3000 rpm for 30 minutes.
3. Cell supernatant: centrifuge at 3000 rpm for 10 minutes to remove particles and polymers.
4. Tissue homogenate: Add tissue to the right amount of saline and mash. Take the supernatant by centrifugation at 3000 rpm for 10 minutes.
5. Preservation: If the sample is not tested in time after collection, please aliquot it in one dose and freeze it at -20 â„ƒ to avoid repeated freezing and thawing. Thaw at room temperature and ensure that the sample is thawed evenly and fully.
Bring your own items
1. Microplate reader (450nm)
2. High-precision sampler and tip: 0.5-10uL, 2-20uL, 20-200uL, 200-1000uL
3. 37 â„ƒ thermostat
1. Store the kit at 2-8 Â° C and equilibrate at room temperature for 20 minutes before use. The concentrated washing liquid taken out of the refrigerator will have crystals, which is a normal phenomenon. The water bath is heated to completely dissolve the crystals before use.
2. The slats not used in the experiment should be immediately returned to the ziplock bag, sealed (dry at low temperature) and stored.
3. The standard dilution can be regarded as a negative control or blank; the sample after pretreatment does not need to be diluted, just take 10Î¼L and add it.
4. Perform the incubation operation strictly in accordance with the time, amount of liquid and sequence indicated in the manual.
5. Shake all liquid components thoroughly before use.
48 hole configuration
12 holes Ã— 8
12 holes Ã— 4 strips
Standard (80pg / mL)
Dilute according to the instructions
20 Ã— washing buffer
Dilute according to the instructions
Note: The standard product is diluted with standard product diluent in order: 80, 40, 20, 10, 5, 2.5 pg / mL
Dilution of 20 Ã— washing buffer: 1:20 dilution of distilled water, that is, 1 part of 20 Ã— washing buffer plus 19 parts of distilled water.
1. Manually wash the plate: throw away all the liquid in the hole, fill each hole with the washing liquid, leave the liquid in the hole after standing for 1 min, pat dry on the absorbent paper, and wash the plate 5 times in this way.
2. Automatic plate washing machine: Inject 350Î¼L of washing liquid into each well, soak for 1min, and wash the plate 5 times.
1. Take out the required slats from the aluminum foil bag after equilibrating at room temperature for 20 min. The remaining slats are sealed with a ziplock bag and put back at 4 Â° C.
2. Set up standard wells and sample wells, add 50Î¼L of standard products of different concentrations to the standard wells;
3. Add 10Î¼L of the sample to be tested first, and then add 40Î¼L of the sample diluent;
4. Then add 100 Î¼L of detection antibody labeled with horseradish peroxidase (HRP) to each well of the standard and sample wells, seal the reaction well with a sealing plate, and incubate for 60 min in a 37 Â° C water bath or incubator.
5. Discard the liquid, pat dry on the absorbent paper, fill each well with the washing solution, let stand for 1min, shake off the washing solution, pat dry on the absorbent paper, and repeat washing the plate 5 times (you can also wash the plate with a washing machine)
6. Add 50 Î¼L of substrate A and B to each well, and incubate at 37 Â° C in the dark for 15 minutes.
7. Add 50Î¼L of stop solution to each well, and measure the OD value of each well at 450nm wavelength within 15min.
Draw standard curve: In the Excel worksheet, the standard product concentration is used as the abscissa, and the corresponding OD value is used as the ordinate. The standard product linear regression curve is drawn, and the concentration value of each sample is calculated according to the curve equation.
1. Accuracy: The correlation coefficient R between the linear regression of the standard product and the expected concentration is greater than or equal to 0.9900.
2. Sensitivity: The minimum detection concentration is less than 1.0 pg / mL.
3. Specificity: Does not cross-react with other soluble structural analogs.
4. Repeatability: The coefficients of variation within and between panels are less than 15%.
5. Storage: 2-8 â„ƒ, protected from light and moisture.
6. Validity: 6 months
1. The kit is for research use only, and should not be used for clinical or human experiments, otherwise all the consequences will be borne by the experimenter, and the company will not be responsible.
2. Strictly follow the instructions, and the experimenter violates the instructions, and the consequences will be borne by the experimenter.
Shanghai Yanhui Biotechnology Co., Ltd. is one of the major domestic suppliers. The company acts as an agent for ELISA kits of different brands and price levels. Tens of thousands of antibody consumable reagents, etc., with many varieties, good quality, high sensitivity, affordable, and can provide free testing services.
Get more active throughout your day with CONTUO Height Adjustable Standing Desk Converter. Stand up and avoid the potential health risks from unhealthy sedentary . Our Standing Desk Converter is designed to save space by moving vertically so that it stays inside its original footprint when adjusting up and down. Unit comes pre-assembled for easy set-up. Simply unpack, attach the tray, and get to work.
Here we can provide customer Manual Converter Desk and Electric Converter desk, So, customers can know the details with CONTUO by further discussion with CONTUO People ! Welcome to CONTUO to choose the Height Adjustable Desk you need.
Standing Desk Converter
Standing Desk Converter,Adjustable Standing Desk Converter,Stand Up Desk Converter,Sit Stand Desk Converter
Shaoxing contuo Transmission Technology Co.,Ltd , https://www.electricdesk.nl